LED KIT SETUP GUIDE
STEP 1:
The LED controller will arrive pre-wired and with velcro
tape applied. Choose a location that best fits your
needs with applying it to the back panel beneath
the working surface or on the under side of the
working surface by removing the tape backing.
STEP 2:
Connect the cable from the LED controller to the LED
strip attached to the top counter via the male and
female plugs.
STEP 3:
Plug the battery (or power cable) into the controller
to turn on LED system with the provided cable. Place
the battery on the base on the bar. .
Note: When disassembling and folding the bar, unplug the LED
strip from the controller when removing the counter to
avoid damages.
Figure 2
Figure 1