STEP 8:
Place the speed rail and the ice bin
as shown below.
Figure 9
Figure 10
How to remove the acrylic panels if needed
Back Panel
STEP 1:
Remove screws
and
. Then remove
the tab as shown below.
S1
S2
S1
S2
STEP 2:
Pull up the acrylic panel.
STEP 1:
Remove screws
and
. Then remove
the side frame as shown below.
S3
S4
STEP 2:
Slide out the side panel.
STEP 1:
Remove screws
and
. Slide out the panel.
S5
S6
S3
S4
S5
S6
Side Panel
Top Panel
COMPACT BAR ASSEMBLY SET UP STEPS
6
ON ACRILYC PANELS ONLY
Remove the brown protective film on one or both sides before installing
the panels, otherwise, the panels could warp. If you got vinyl printing,
the protective film will only be on one side. Don't remove the vinyl printing.
