Source: https://portgmbh-my.sharepoint.com/personal/mt_port_de/Documents/manuals/ecan9_manual.docx
Version: 1.0
Confidential
5/13
3
Initial Setup
For the setup of the gateway, the following requirements must be fulfilled:
PC with a recent web browser (tested with Firefox and Chrome)
connection to an Ethernet network
Power supply 24V
For initial commissioning of EtherCAN ARM9 gateways, connect the device to an Ethernet
network and provide power to the device.
4
Configuration via Webinterface
The EtherCAN ARM9 device can be configured via a recent web browser. When using factory
defaults, the device has the IP address
192.168.199.22
.
The following section provides an overview of the configuration of the EtherCAN ARM9 device
via a web browser.
4.1
Basic Settings
4.1.1
General concepts
When making changes to the settings via the web interface, most of the changes will be active
immediately. Nevertheless, the changes are not saved to persistent memory unless explicitly
requested via “Config. Management” menu entry. This twostep process allows testing of new
settings without touching a well-known configuration until all required settings are tested.
The user will get a hint that additional saving is required in every configuration menu where this
general concept applies:
