Porsche Taycan, Руководство пользователя

Страница: 122 / 302

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
Garage door opener (HomeLink
®
)
120
Garage door opener
(HomeLink
®
)
General Safety Instructions
WARNING
Pinching, crushing or
impact through operated
equipment
If persons or animals are in the movement area of
the operated equipment, there is a risk of injury
while the garage door opener is being operated or
programmed.
e Make sure there are no persons, animals or ob-
jects in the movement area of the operated
equipment while the HomeLink
®
system is being
operated or programmed.
e
Observe the safety instructions for the original
remote control.
Operating principle
The HomeLink
®
system can be used to operate up to
eight radio-controlled devices (garage doors/prop-
erty gates, security systems, house lighting) from
the vehicle via profiles in the central display.
> Read the instructions for the original remote
control.
Information
For information on the compatibility of your vehicle’s
HomeLink
®
system with the original remote control:
e
Contact an authorized Porsche dealer.
> Visit www.homelink.com or call the toll-free
hotline on 1–800–355–3515.
Information
e
Before selling your vehicle, remember to delete
the garage door opener signals.
Teaching garage door opener
b b Operational readiness established.
b b Vehicle is positioned to allow visual contact with
remote-controlled equipment and is within the
receiver range (signal is transmitted).
Systems with remote control
1.
e
HomeLink
®
e
Configure new profile
2. Follow the instructions on the screen. During
programming, aim the remote control at the
overhead console from the height of the center
console.
Systems without rolling code system:
The profile is taught.
– or –
Systems with rolling code system:
The profile is created. Manual synchronization
between the HomeLink
®
and vehicle is still re-
quired to complete the teaching process:
3. Follow the instructions on the screen.
> Read and follow the instructions for the
original remote control.
The profile is taught.
Information
If the signals cannot be stored despite having care-
fully read this chapter and the operating instructions
for the original remote control:
e Contact an authorized Porsche dealer.
e Make sure that there is a new battery in the ga-
rage door opener remote control. Insufficient
battery power can cause malfunctions in signal
transmission. The system in the vehicle then
learns an incorrect code, which cannot be reliably
recognized.
e Check the compatibility of the vehicle's
HomeLink
®
system with the original remote
control.
Systems without remote control (FixKit
receiver)
1.
e
HomeLink
®
e
Configure new profile
e
2. Select the desired option.
3. Follow the instructions on the screen.
The profile is taught.
Using the garage door opener
Calling up configured HomeLink
®
profiles
manually
b b Operational readiness established.
b b Vehicle is positioned to allow visual contact with
remote-controlled equipment and is within the
receiver range (signal is transmitted).
1. e HomeLink
®
2. Select the desired profile.