Porsche Panamera 2018, Руководство пользователя

Страница: 124 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
H Hyybbrriidd VVeehhiiccllee
122
Hybrid Vehicle
Warning stickers
Hybrid system components are each labeled with
one of the two warning stickers (illustration below),
which warn against touching components and of
high voltage.
e
Never remove, deface or render warning stick-
ers and warning signs illegible.
e
Never remove covers of hybrid system com-
ponents that are labeled with the warning
sticker.
Key to pictograms
Risk of electric shock
due to improper use.
Warning of dangerous
electrical voltage.
Danger!
Follow the instruc-
tions on hybrid sys-
tem components and
in the Manual.
Hybrid functions and operating modes
while driving
The hybrid functions and operating modes are au-
tomatically set by the vehicle control system in the
relevant drive mode. This ensures that the vehicle
is always in the best possible operating mode for
the relevant drive mode.
The parallel plug-in hybrid drive allows the vehicle
to be run in the following hybrid operating modes:
– Driving powered by the electric machine.
– Driving powered by the combustion engine.
– Driving powered by the electric machine and
combustion engine. The electric machine also
assists the combustion engine in powering the
vehicle (boost).
– Driving with recuperation (energy recovery):
The electric machine charges the high-voltage
battery, e.g. during braking, when the vehicle is
overrunning with the combustion engine run-
ning and automatically when driving downhill.
Operating conditions of the electric
drive system
b b
High-voltage battery is sufficiently charged.
b b
Engine oil temperature at least approx.
32 °F (0 °C).
b b
The temperature of the high-voltage battery is
neither too low nor too high.
b b
Temperature of the electric machine is not too
high.
b b
Hood is closed.
A message appears on the instrument cluster if
these conditions have not been met.
Starting the vehicle
b b
Vehicle plug not inserted in the vehicle charge
port.
1. Press the footbrake.
2. Press the P button on the selector lever or se-
lect operating mode N .
3. Do not press the accelerator pedal.
4. Turn operating device briefly to ignition lock
position
2 .
READY appears on the instrument cluster.
You can drive off normally.
Information
If the vehicle plug is inserted in the vehicle charge
port when the vehicle is started, a message ap-
pears on the instrument cluster.
e
Pull the vehicle plug from the vehicle charge
port within approx. 20 seconds.
Reaction after leaving the vehicle
After leaving the vehicle after the engine has stop-
ped automatically (driver-side seat belt unfas-
tened, driver’s door opened and brake pedal
released), the engine will
not start automati-
cally . Additionally, in modes D , R or M :
– The electric parking brake is engaged. Please
see chapter "Brakes" on page 69.
– The transmission parking lock P is engaged.
Please see chapter "P button" on page 241.
The vehicle can still be moved with the driver's
door open and the driver's seat belt unfastened by
releasing the electric parking brake manually. In
this case, the parking brake remains released and
the selected transmission range engaged.
Automatic engine starting is enabled again if one
of the following conditions is detected within 30
seconds of leaving the vehicle:
– The brake pedal is pressed and either the