Porsche Panamera 2018, Руководство пользователя

Страница: 120 / 329

A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
G Gaarraaggee D Doooorr O Oppeenneerr ((H Hoom meeLLiinnkk ® ® ))
118
Garage Door Opener
(HomeLink ® )
WARNING
Pinching, crushing or
impact through oper-
ated equipment
If persons or animals are in the movement area of
the operated equipment, there is a risk of injury
while the garage door opener is being operated or
programmed.
e
When using or programming the HomeLink ®
system, ensure that no persons, animals or
objects are within the range of movement of
the equipment that is being operated.
e
Observe the safety instructions for the original
remote control.
Fig. 69: Garage door opener light indicator
With the HomeLink ® system, up to three items of
remote-controlled equipment (e.g. garage door/
gate to your property, security systems, house
lights) can be operated from inside the vehicle us-
ing the memory buttons on the overhead console.
>
Observe the instructions for the original hand
transmitter.
Information
For information on the compatibility of your ve-
hicle’s HomeLink
® system with the original hand
transmitter:
e
Contact an authorized Porsche dealer.
>
Visit www.homelink.com or call the toll-free
hotline on 1–800–355–3515.
Information
e
Before selling your vehicle, remember to delete
the garage door opener signals.
Using the garage door opener
b b
Ignition is switched on.
b b
The vehicle faces the receiver and is within the
receiver range (signal is transmitted in the di-
rection of travel).
e
Press and hold the relevant HomeLink ® button
on the overhead console.
The light indicator
A lights up green during sig-
nal transmission.
Programming the garage door
opener
Configure the garage door opener via the touch
display on the dashboard.
b b
The ignition is switched on.
b b
Engine is not running.
b b
Turn signals are switched off.
b b
The vehicle faces the receiver and is within the
receiver range (signal is transmitted in the di-
rection of travel).
With some systems, changeable code program-
ming of the HomeLink
® systems is necessary.
Help from a second person makes programming
easier.
e
CAR
e
CONTROL
e
Garage door
opener
e
Configure buttons
Information
If the signals cannot be assigned to the buttons
although you have followed this chapter and the
instructions for the original remote control
carefully:
e
Contact an authorized Porsche dealer.
e
make sure that there is a new battery in the ga-
rage door opener remote control. Insufficient
battery power can cause malfunctions in signal
transmission. In this case, the system in the
vehicle learns an incorrect code that cannot be
reliably detected by the garage door drive
system.
e
Check the compatibility of your vehicle’s
HomeLink
® system with the original hand
transmitter.
Deleting stored signals from the
buttons
This process deletes all the programmed button
assignments. It is not possible to delete individual
buttons.
e
CAR
e
CONTROL
e
Garage door
opener
e
Delete button assignment