33
Operating Manual
DE
EN
FR
IT
ES
PT
NL
SV
FI
DA
NO
EL
CZ
HU
PL
HR
SR
SK
SL
ET
LT
LV
RO
BG
MK
Variant 4: Direct connection of the charger and
energy manager via PLC
Because the energy manager features an integrated
PLC adapter, the connection between the charger
and the energy manager can also take place directly
via PLC. Connection of the energy manager to the
router then once again takes place via WiFi, PLC or
Ethernet.
With the mobile device, access to the web applica-
tion of the energy manager (and charger) then takes
place as in variants 2 and 3 via the router.
Operation of the charger via the buttons on the
device or via the web application of the charger
remains possible. In this case, however, the energy
manager settings for limiting the charging current
are overruled.
f
Refer to chapter “Adding the energy manager” on
page 39.
f
Refer to chapter “Establishing a Connection to
the Charger” on page 39.
Fig. 4: Direct connection of the charger and energy manager
via PLC (application example)
Scope of Supply
Fig. 5: Scope of supply
Operating Instructions
In some countries, the relevant authorities must be
notified when you connect electric vehicle charging
equipment.
e
Check any obligations to notify the authorities,
technical connection requirements (TCR) and
legal requirements for operation before
connecting charging equipment.
A
Porsche Mobile Charger Plus
B
Electrical socket
C
Network connection via power line (PLC)
D
PLC adapter
E
Network connection via Ethernet
F
WiFi router
G
WiFi
H
Mobile device
I
Energy manager
J
Network connection via Ethernet (alternative)
A
Supply cable (permanently attached to the control unit
or detachable)
B
Power plug for connecting to the mains supply
C
Control unit
D
Vehicle plug (connector plug for the vehicle), differs
depending on country (type 2 shown)
E
Vehicle cable (permanently attached to control unit)
F
Letter containing access data
Information
Optional components: Various wall mounts are avail-
able for the charger, depending on country,
e.g. the basic wall mount.
NOTICE
Damage to the charger
e
Always place the charger on a solid surface when
charging.
e
Porsche recommends that the charger be placed
in the wall mount
during operation. In certain
countries, e.g. in Switzerland
1)
, the charger may
only be operated in the wall mount.
e
Do not immerse the charger in water.
e
Protect the charger from snow and ice.
e
Handle the charger carefully and protect it from
potential damage resulting from being driven over,
dropped, pulled, bent or crushed.
e
Do not open the charger housing.
1) Time of printing. Further information is available from
a qualified specialist workshop. Porsche recommends
a Porsche partner as they have trained workshop personnel
and the necessary parts and tools.
