Porsche 928 GTS 1994, Руководство пользователя

Страница: 102 / 127

Replacing bulbs
To avoid short circuits, turn off the respective
electrical components when changing light
bulbs.
Keep bulbs free of grease and dirt. Hold
them only with a clean cloth or soft paper.
Do not use chemical cleaning agents for
the plastic lenses. Plastic lenses should
only be cleaned with water or a mild soap/
water solution.
We recommend you keep an assortment of
spare bulbs in the car.
When traveling abroad, remember that some
countries require spare bulbs as part of the
safety equipment.
Headlights
(high beam, low beam)
1. Turn the ignition on.
2. Turn light switch to position 2 to raise the
headlights.
3. Turn the ignition off.
4. Unsrew the 3 Phillips screws (arrows) and re-
move headlight cover.
5. Turn holder of defective bulb anticlockwise to
limit stop and remove.
6. Unplug wires, replace bulb and reconnect the
wires.
7. Reinstall bulbholder. Be sure that guide pins
on bulb base fit into socket of reflector. Turn
bulbholder clockwise to limit stop.
8. Check functioning of bulb and adjust head-
lights.
9. Reinstall headlight cover.
103