Porsche 2007 Cayenne, Руководство пользователя

Страница: 373 / 428

Minor Repairs
373
Connecting jumper cables
Always observe the sequence below:
1. Remove cover
A
.
2. Open the cap of the positive terminal for jump
starting(
+
).
3. Attach the positive lead first to the positive
terminal for jump starting ( + ), then to the posi-
tive terminal of the donor battery.
4. Connect the negative lead first to the negative
terminal of the donor battery, then to the
grounding point for jump starting ( – ).
+ = Positive terminal for jump starting
– = Grounding point for jump starting
5. Run the engine of the donor car at a higher
speed.
6. Start the engine.
An attempted start using jumper cables should
not last more than 15 seconds. Then allow a
waiting period of at least one minute.
7. Disconnect the negative jumper cable from the
ground point for jump starting ( – ) first, then
from the negative terminal of the donor bat-
tery.
8. Disconnect the positive jumper cable from the
positive terminal of the donor battery first,
then from the positive terminal for jump start-
ing (
+
).
9. Close the cap of the positive terminal for jump
starting ( + ).