23
Using the web application
EN
Saving settings
Your configuration settings and previously entered
data can be saved using a backup. With this backup,
you can restore these settings if necessary
(e.g. following a reset to factory settings). Backups
are created manually in the web application.
No passwords or personal data, such as the charging
history, are stored in the backup.
Creating a backup
With manual backup, the data is stored on your
device.
b
Your device and the charger are located in the
same network.
1.
Select
Export
.
2.
Navigate to the storage location.
3.
Save the backup file.
Assign password:
Enter a password.
The password protects your data and must be
entered when you import or restore the backup.
Restoring a backup
You can import a saved backup file from your device
to the charger.
b
Your device and the charger are located in the
same network.
1.
Select
Restore from file
.
2.
Navigate to the backup file, and select it.
3.
Enter the password you used to save the
backup file.
Resetting to factory settings
If you enable this function, all personal data and
configurations, e.g. charging history and network
settings, are deleted. Moreover, all passwords will be
reset to the initial passwords indicated in the letter
containing your access data.
We recommend creating a backup copy of your
settings before a reset.
e
Enable
Allow reset to factory settings
.
f
Refer to the chapter “Creating a backup” on
Information
If the settings are reset to the factory state, the setup
wizard will assist you with the most important
charger settings the next time you start it up.
