PORSCHE DESIGN PDT60, Руководство пользователя

Страница: 8 / 17

Different ANC mode can be toggled via double
tap on the Left earpiece.
• ANC function is auto active when put into
the ear.
• Touch the Right MFB panel twice, it will
change to Awareness mode.
• Touch the Right MFB panel twice again, it
will turn the ANC function off.
Tip
Note

The earpieces cannot connect to more than 1 device at
the same time. If you have two paired Bluetooth devices,
only turn on the Bluetooth function of the device that you
want to connect.

If you turn on the Bluetooth function of your Bluetooth
device after turning on the earpieces, you have to go to
the Bluetooth menu of the device and connect the
earpieces to the device manully.
Tip

If all ready connected to the Bluetooth device, by
removing the earpieces, it will automatically change to
sleep mode after 3 minutes. When put earpiece back, it
will return to active mode.

If the earpieces fails to connect to any Bluetooth device
within 3.5 minutes, it will turn off automatically to save
the battery life.

In some Bluetooth devices, connection may not be
automatic. In this case, you have to go to the Bluetooth
menu of your device and connect the earpieces to the
Bluetooth device manually.
The blue LED flashes.
The earpieces will search the last
connected Bluetooth device and
reconnect to it automatically. If the last
connected device is not available, the
earpieces will enter pairing mode.
4 Use your
earpieces
Turn on the Bluetooth function of your
Bluetooth device.
Open the top cover from charging box.
Connect the earpieces to your
Bluetooth device
Task
ANC ON Right
earpiece
Right
earpiece
Double tap
Double tap Awareness
mode
ANC OFF
Right
earpiece
Right
earpiece
Double tap
Tap and hold Attention
mode
Multifunc-
tion button
Operation
Control ANC (active noise
cancelation)
Enable ANC
ANC ON
Awareness
mode
ANC OFF