PORSCHE DESIGN PDB90, Руководство пользователя

Страница: 13 / 20

12
Factory Reset
Reset device to default setting
•
If the product does not respond to operation,
you can reset the product to the factory
default Settings.
In standby mode, hold down the / -
button for 8 seconds until RESET appears on
the display panel.
After factory Settings are restored, the
product will automatically shut down and
restart.
•
•
Setup Menu
settings to provide you with an even better
experience.
1
Press the (MENU) button on the
remote control to open the menu.
2
Select the content with Down / Up
on the remote controller
Display
Description
Adjust the SUB Level
Adjust the CTR Level
Adjust the SIDE L Level
Adjust the SIDE R Level
Start pairing
Set display brightness
Set display ON/OFF
Set AUTO STNBY ON/OFF
Start FW upgrade
3
Press Middle to confirm your selection.
4
Change the initial values for each of the
settings with the cursors Left/Right.
5
Press Middle to confirm your selection.
• To return to the previous screen / exit the
settings, press (Back).
• If no button is pressed within 5 seconds,
the system will automatically exit the
menu.
EQ
Several preset EQ modes are available:
MOVIE, MUSIC , VOICE, SPORT, CUSTM.
» By default, the EQ is set to MOVIE.
BASS/TREBLE
Adjust the Bass/Treble Level.
» bass + 5 ~ bass – 5
» 5 ~ treble –5
» By default, the Bass/Treble is set to 0.
Dialogue mode
Dynamic Range control (DRC)
Dialogue mode improves the clarity of dialogue
and voices in movies, TV shows and podcasts
by adjusting the tonal balance of the product.
Press the selected DIALOGUE repeatedly,
then press the left and right navigation buttons
to adjust the DIALOGUE level.
You can apply dynamic range control to
dolby digital orbit. Press 3 repeatedly to
select DRC, then press the left and right
navigation buttons to turn DRC on, off,
or set to automatic.
If the audio and video are not synchronized,
delay the audio to match the video.
Press to select SYNC repeatedly, then press
the left and right navigation buttons to
synchronize audio and video.
Synchronize Video and Audio
DIMMER
Set display brightness.
» LOW, MID, HIGH
» By default, the dimmer is set to HIGH.
BT PAIR
SUB
CTR
SIDE L
SIDE R
AUTO STNBY
UPGRACE