UNPACK AND SET-UP ( CONT.)
CONTROLS
LED Work Light
off automatically in a few seconds.
NOTE:
Use a clean cloth when wiping the lamp holder to avoid scratching
which can reduce luminance.
Advancing/Retracting the Cable
To advance the cable manually:
Lock the switch trigger by placing the forward/reverse lever in center
position.
Set the front operation handle on the position of “0”.
Hold the tool body by one hand and advance the cable with the
other.
cable back with the other.
forward or reverse rotation.)
NOTE:
manually.
F
R
0
NOTICE:
To advance the cable using the switch trigger:
Place the direction of forward/reverse lever in forward position (press
the L).
Set the front operation handle on the position of “F”.
To retract the cable use the switch trigger:
Place the direction of forward/reverse lever in forward position (press
the L).
Set the front operation handle on the position of “R”
operation handle on the position of “F” to retract the cable. (Only use
in the pipe etc.)
reverse rotation.
L
R
Center Lock
CONOZCA SU PRODUCTO
0DQJRGH8VR)URQWDO
2. Cable
3. Tambor
%DVHGHFDUJD
$GDSWDGRUGHFDUJD$&'&
3XHUWRGH'UHQDMH
3DODQFDGH$YDQFH\5HWURFHVR
*DWLOORGH9HORFLGDG9DULDEOH
7. Batería
1
2
3
4
Cargador de batería
9ROWDMH9'&0i[
9HORFLGDG1RPLQDOPLQ
&DSDFLGDGGH'UDJDGRa
'LiPHWURGHO&DEOH
/RQJLWXGGHO&DEOHSLHV
%DWHUtD90D[$K/LLRQ
7LHPSRGH&DUJDPLQXWRVDSUR[
3HVROEVLQFOX\HQGREDWHUtD
5
7
9
Arial
Bold
SW
$ULDO
行间距
10
ESPECIFICACIONES
