3
encrypted and secured to protect against manipulation. Thanks to the large solar panel the
siren can be mounted on nearly every place outside the house, with direct or indirect sun
light. The siren is maintenance-free and water-proofed (IP56). The average solar energy of
one day keeps the device alive for up to 50 days (without using the siren). Additionally an
internal temperature sensor reports the temperature inside the siren’s enclosure.
Installation Guidelines
The siren can be placed on every location outside the home. Thanks to rating IP56 the
location does not even need to be dry but please make sure it is placed high enough so that
children do not accidently remove it. The device is self-protected against tamper and theft. In
a first step the mounting plate (ill. 1 (1)) is placed on the wall using the 4 screws provided. It is
recommended to mount the complete device 5 mm from the wall for better sound.
1.
Open the case and turn on the power switch (ill.2 (A)) by moving it towards the
inclusion button (B). All LEDs will shine for a short moment to confirm.
2.
Remove the metal mounting plate from the device.
3.
Remove all protection foil from the device.
4.
Turn your controller into inclusion mode with a short single click on the internal
inclusion button (ill.2 (B)).
Once included the enclosure of the siren is closed using the 6 screws. Finally the siren is
placed on the mounting plate.
Attention: As soon as the siren is placed on the mounting plate the tamper protection is
activated. The siren must not be removed from the plate anymore. The behavior in this
moment is defined by the configuration parameter No 1.
Behavior within the Z-Wave Network
On factory default the device does not belong to any Z-Wave network. The device needs to
join an existing wireless network to communicate with the devices of this network. This
(A) Power Button
(B) Inclusion Button
(C) Battery Connection
ill. 1
ill. 2
(D) Solar Module Connection
(E) Charge Connection
(F) Speaker Connection
