27-12-2020
manual.zwave.eu/backend/make.php?lang=en&sku=POPE700854
manual.zwave.eu/backend/make.php?lang=en&sku=POPE700854
3/6
(A) Power Button
(B) Z-Wave Button
(C) Battery Con
(D) Solar Module Connection
(E) Charge Connection (12V DC)
(F) Speaker Connection
(G) Fuse (Type: 5ET 1.6-R; FUSE GLASS 1.6A 250VAC 5X20MM
)
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the
devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This
controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Inclusion
1. Remove the metal mounting plate from the device.
2. Open the case and turn on the power switch
3. Press the button once.
Exclusion
1. Deactivate the theft protection via parmeter 1.
2. Remove the siren from its mount.
3. Open the case.
4. Press the button once.
Product Usage
The siren can be turned on and off using wireless commands. To protect this communication from misuse is strongly recommended to operate the siren in secure
communication mode. The secure communication is activated on default during inclusion unless explicitly suppressed. When activated the siren will generate a
105 dB alarm sound and a flash light. This behavior can be configured as well using configuration parameter 5. Make sure to deactivate the tamper protection
before removing an included siren from the mounting plate.
It is possible ot power the Siren from an external power supply. Please use any 12 V DC power with minimum of 1 W output. The terminals marked with E ( see ill1
for more details) allows to connect the power source to the device. its recommended ot detach the cables to the solar cell in this operating mode.
Node Information Frame
