Inclusion/exclusion of the wall plug
For wireless operation, the wall plug and the central unit need
to be linked to each other. This process is called “inclusion”.
Included devices can be disconnected. This process is called
“exclusion”.
The inclusion/exclusion process is controlled by the central
unit – refer to the documentation for the central unit.
1. Plug the wall plug into a fixed mains outlet with grounding
contacts (CEE 7/4).
2. Start “Inclusion” resp. “Exclusion” mode on the chosen
central unit.
3. Press the button on the wall plug 3 times within a period
of around 2 seconds.
The Status LED lights up white.
During the next 5 seconds, the wireless connection is
established and the inclusion/exclusion process for the wall
plug is performed.
Once the inclusion/exclusion process has been successfully
completed, the Status LED flashes white and goes back to
showing the previous switch state.
If the wall plug has already been included to
another central unit, it first has to be excluded
before starting the inclusion.
Technical data
Operating voltage
230 V +15 % / –10%; 50 Hz
Switching power
max. 3680 W resistive
Switching current
max. 16 A
Continuous power
max. 3200 W resistive
Continuous current
max. 14 A
Energy consumption
typical 0.75 W ; maximum 1.2 W
Wireless technology
Z-Wave (868 MHz EU frequency)
Range
Typical 20 m in buildings;
actual range will depend on specific
conditions in the building
Approx. 100 m outdoors
Relay
Switching relay approved for lamp
loads (inrush current) and inductive
loads
Power measurement
0 ... 3680 W
Measurement resolution 0.1 W
Display resolution 1 W
Energy measurement
Measurement resolution 0.1 Wh
Display resolution 1 Wh
Protection class
IP 20
Ambient temperature
0 ... 35 °C
Dimensions
113 x 56 x 70 mm (H x W x D)
Weight
132 g
Certifications
VDE, CE, Z-Wave
Subject to technical alterations.
Further Documents
The download section of our website www.ce.zwave.eu
offers the following further documents:
▪
CE certificate of conformity
Disposal
▪
Packaging and replaced parts are to
be disposed of in accordance with the
regulations of the country in which the
device was installed.
▪
Do not dispose of the wall plug with
house hold waste. Instead, take it to your
local authorised collection point.
6
5
4
789 993-AA
Popp & Co.
Große Johannisstr. 7
20457 Hamburg
Germany
