Programming Guide
HDC Inc.
www.poplocks.com
4
Pro Controller II
Pat. Pend
Door lock control
a. Driving: press button 1 or lock button on RS to unlock doors. The doors can be locked after 0.5 sec.
b. Press button 2 or unlock button on RS to unlock doors. The doors can be unlocked after 0.5 sec.
c. Press door switch lock once to lock all doors sequentially
d. Press door switch unlock once to unlock all doors sequentially (when 3C OFF) or press twice
to unlock all doors (when 3C ON)
Auto rearming
When alarm is disarmed, if ACC is not ON and doors not open, after 30 sec system will be
automatically rearmed.
Door open warning
If one of the doors is opened when the ignition is ON, the parking lights will flash 1 min max
for warning coming vehicles.
Memory function
The alarm memory will record the last condition when the power is cut off
Sensor bypass warning
Pressing button 1 during the first 5 seconds, if any sensor is triggered, that sensor will
be by-passed, and siren will chirp twice as indicated. The by-passed sensor will be
back and functioning after 2 seconds of no trigger activity
Function Selection
There are two jumper selections (J1 and J2). See the table as below.
Important: All jumper selections have to be determined before install. Otherwise, you have to
power off the module again for reset.
LED condition
a. When armed, LED flash slowly once a sec.
b. When armed, if alarm is triggered, LED will flash quickly
c. LED will flash quickly when system starts Passive Arming count down
d. Valet mode: LED constantly ON.
JUMPER MODE FUNCTION MODE FUNCTION
J1: 3C ON/OFF ON OFF
J2: Anti-carjacking OFF OFF
