manualshive.com logo in svg

POP UP ELEVATING WORK PLATFORM, Руководство по безопасности и обслуживанию оператора

Поделиться
Скачать
POP UP ELEVATING WORK PLATFORM Скачать руководство пользователя страница 10

ENGAGING THE BRAKES

SECTION FOUR

 | OPERATING INSTRUCTIONS

Always ensure that both castor brakes are locked before elevating the work platform to prevent any 
inadvertent movement.

The brakes are engaged by pushing down on the lever and pulling up the lever as shown.

Page 10 of 23

POP-UP PUSH 6 ECO OPERATOR’S SAFETY AND MAINTENANCE HANDBOOK (v.0.4.0409)

BRAKE OFF

BRAKE ON

POWERING UP

The POP-UP PUSH 6 ECO is provided with a key operated switch which is used to isolate the battery and 
therefore the electrical system, preventing unauthorised use. To enable the electrical system, first turn 
the Maintenance Isolater switch to position ‘1’ (ON) and insert the key into the emergency stop button. 
Turn clockwise to release the button. Ensure that when the machine is not in use, the emergency stop 
button is depressed and the key is removed. Turn the Maintenance Isolator switch to position ‘0’ (OFF).

Содержание ELEVATING WORK PLATFORM

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды