9
There are 3 sleeves on the Ball
Return Ramp. Slide the Lean
Bar (#9) through the correct sleeve, (Fig 14A).
Then attach the Lean Bar to the Ramp
Tubes (#8) using the Spring Locks (Fig. 14B).
- If you did not use any Height
Extension Tubes, use the sleeve
closest to the backboard.
- If you used one Height Extension
Tube, use the middle sleeve.
- If you used both Height Extension
tubes, use the sleeve closest to
the Lean Bar.
Fig.14A
Fig. 14B
STEP 14
6
26
29
30
29
Attach a Cross Tube (#6) across the Ball Return Ramp (#18)
to the Lean Bar (#9) using a Bolt (#26), two Washers (#29)
and a Nut (#30) (Fig. 15A). Pull the straps around the Lean bar
and snap it into the buckle (Fig. 15B). If neccesary, wrap the
straps around the bar before buckling.
Fig. 15A
Fig. 15B
STEP 15
9
9
SKU# PASHOM19-02
WWW.POP-A-SHOT.NET
Pop-A-Shot Home | Dual Shot Page 11/16
