Fig. 6A
Fig. 6B
12
1
1
11
8
Fig. 7A
8
7
7
Locking Pin
29
25
30
11
12
Attach the Side Arms (#11) to the
Board Tubes (#2) using a Bolt (#25), two Washers (#29)
and a Nut (#30) (Fig. 6A). Make sure the Arm is on the
outside of the Board Tube (#2).
Attach the Forward Tubes (#12)
to the Top Tubes (#1) using
the spring locks (Fig. 6B). Make
sure the Top Tubes flare outward.
Attach the Side Tubes (#7) to the
Ramp Tubes (#8) using the spring locks (Fig. 7A).
SKU# PASOUT19-02
WWW.POP-A-SHOT.NET
Pop-A-Shot Outdoor | Dual Shot Page 7/16
12