8
When you rotate the right wheel forward by hand, the
right wheel will teeth jump
Hub or right drive gear is worn out. Please contact your local dealer.
The cleaner turns in circles, it won’t go straight at all.
The area of cleaning pool with cleaner is small.
The internal drive is damaged. Please contact your local dealer.
Make sure that the hose is not bent or coiled.
The hose is too short. Please refer to "connecting the hose " in the user
manual.
The hose weight may be in the wrong position. Refer to "connecting the
hose" in the user manual. It should be 2 / 3 of the single pipe from the
cleaning head.
The rotating joint of hose connection (on the turbine top ) may be dirty, which
may cause the rotation to be stuck, and the dirt needs to be removed.
The return water may push the hose away, so that the return water direction
is downward.
Check wheel RPM. Please refer to " adjusting the cleaner " in the user
manual Device speed.
Observe the cleaner for more than 5 minutes, make sure that the cleaner
has 3 steering angles of different sizes, about (180 °, 270 ° and 450 °), if not,
contact your local dealer.
The cleaner climbs the wall too much or climbs out.
Excessive suction or flow. Check the rotation speed of the wheel, Please
refer to " adjusting the cleaner " in the user manual .
Do not use the bypass Valve (if connected with wall skimmer).
Adjust the wall skimmer plate.
The cleaner won’t climb the wall.
Check wheel RPM. Please refer to " adjusting the cleaner " in the user
manual .
The hose weight may be in the wrong position. Refer to "connecting the
hose" in the user manual. It should be 2 / 3 of the single pipe from the
cleaning head.
The track is too loose. It falls off the wheel. Track replacement.
The swing of the skirt is not flexible. During operation, some end skirts do
not stick to the surface of the pool. Swing the inactive group of skirts back
and forth by hand to make it freely ; Or, contact the local supplier.
Wheels Swaying .
The button of the wheel is not in place. Please refer to " Wheel or track
folding and replacement " in the user manual.
The wheels are worn, please replace them. Please refer to " Wheel or track
folding and replacement" in the user manual.
The cleaner falls upside down, and no back.
The hose weight may be in the wrong position. Refer to "connecting the
hose" in the user manual. It should be 2 / 3 of the single pipe from the
cleaning head.
The hose is too short. Please refer to "connecting the hose " in the user
manual.
The return water may push the hose away, so that the return water direction
is downward.
The turbine hub may be worn. Please contact your local dealer.
Turbine blades may be worn. Please contact your local dealer.
The turbine blades fall off the hub.
