PoolMaster Pro Rebounder 72783 Скачать руководство пользователя страница 3

Страница: 3 / 3

ssembly I

nstr

tions

Step 6

• Use Ball Needle and a hand pump (not included) to inflate

the Ball to 26 ½" circumference (approx. 8 ½" diameter).

Step 7

• Place "Warning! No Slam Dunking!" on base between

PVC Upright Supports.

poolmaster.com

• Remove the 2’’ pre-threaded Bolt from the U-Shaped

Upright and thread it through the front of the

backboard into the hole below the hoop bracket

and back into the bottom hole of the U-Shaped

backboard support and secure with hex nut.

• Attach the 3 ¼’’ bolt through the center hole in the

hoop bracket and into the top hole of the PVC

U-Shaped Support. Secure with hex nut.

Step 4

• Insert the U-Shaped Support into the Base. Fill Base

with water or sand and cover up opening with Cap.

• May need rubber mallet to push U-Shaped Upright

through Base opening.

Step 5

Bolt

Back View

Bolt

Front View

Содержание Pro Rebounder 72783

Страница 1: ...e the game ball floating around the pool when not in use 2 After use wash away the chlorine pool water with plain water using a garden hose 3 When not in use store your game in a dry place away from d...

Страница 2: ...ntinue this process with each loop until all loops are on the hoop 1 1 2 3 4 5 6 2 3 5 6 4 Step 2 Attach the Hoop to the Backboard by inserting 2 2 Bolts through the Hoop Bracket Hoop and Backboard as...

Страница 3: ...nt of the backboard into the hole below the hoop bracket and back into the bottom hole of the U Shaped backboard support and secure with hex nut Attach the 3 bolt through the center hole in the hoop b...