8
6.
Cleaner Connection To Dedicated Suction Line
Turn OFF your pool
pump
If your skimmer is equipped with a dedicated
suction line, insert the vacuum plug “
I
” into the
vacuum hole first and then attach the pressure
regulator “
J
” into the plug
“I
” by following the
arrow marking on pressure regulator bottom.
Finally, attach the hose “
L
” to this regulator as
shown.
7.
Cleaner Connection To Skimmer
To connect your cleaner to your pool
skimmer, remove the basket and
vacuum plate and insert vacuum plug
“
I
” into the hole. Assemble the elbow
“
H
” on both ends of pressure regulator
“
J
”. Follow the arrow marking on the
pressure regulator to connect the
corresponding elbow to the vacuum
plug and then connect the other elbow
with hose “
L
” as shown.
Set your filtration system
to the vacuum setting. To
operate properly, the pump
must have a minimum
power
of 0.75 HP and filtration
system flow should not be
less than 6m
3
h(100 lpm) .
2
1
1
2
NOTE: The pressure regulator should be below
the water level. If the pressure regulator is out of
the water level after following above instruction,
you may connect the pressure regulator directly
to the vacuum plug.
