READ THIS BEFORE SERVICING
–
ALWAYS WEAR SAFETY GOGGLES AND GLOVES WHEN SERVICING THE
PERISTALTIC PUMP AND/OR CHEMICAL FEED LINES.
–
USE A TYPE E RESPIRATOR TO PROTECT AIRWAYS FROM ACID FUMES
–
USE OF ACID RESISTANT BOOTS IS RECOMMENDED
–
IT IS ADVISED (WHERE POSSIBLE) TO FLUSH THE CHEMICAL LINES WITH FRESH
WATER BEFORE SERVICING TO REDUCE THE CHANCE OF SPILLIAGE.
–
ALWAYS ENSURE THERE IS PLENTY OF FRESH WATER READILY AVAILABLE TO
RINSE ANY SPILLED CHEMICALS, OR TOOLS / CLOTHING / SKIN / EYES ETC.
EXPOSED TO CHEMICALS.
–
THE POOL LAB PERISTALTIC PUMP HAS BEEN DESIGNED FOR USE WITH 16.5%
HYDROCHLORIC ACID ONLY. USE OF HIGHER STRENGTH HYDROCHLORIC ACID
(OR OTHER ACID TYPES) MAY DAMAGE EQUIPMENT, AND RESULT IN A SAFETY
HAZARD.
WARNING:
Extreme care must be taken when working with the acid feed tubing as under certain
conditions the tubing may be pressurized. Loosen the acid drum reservoir cap to relieve any potential
pressure on the inlet. If acid injection point is below water level, ensure appropriate isolation valves
are closed and vent isolated plumbing section to relieve any pressure before proceeding.
