9
400 SERIES
Water
CYCLER
MeteredPoolPurifier
400 SERIES
Water
CYCLER
MeteredPoolPurifier
400 SERIES
Water
CYCLER
MeteredPoolPurifier
Water
CYCLER
MeteredPoolPurifier
2” – 36” apart on straight pipe
SCOOPS 2”– 36”
APART ON STRAIGHT
PIPE
Screw elbow into reducer
bushings on both sides.
Attach a gasket to
each scoop.
Tighten scoop clamps with a
screwdriver.
Cut tubing
to size for
each POOL
FROG Cycler
connection
and attach one
to each elbow
with clamps.
Place scoops inside
holes so the inlet
scoop faces the water
flow and the outlet
scoop faces away
from the water flow.
Scoop arrows should
be facing each other
when correct.
Attach each hose to
venturi scoop male
nipple with a small
clamp and tighten
with screwdriver.
Tighten clamps
with screwdriver.
When pipe is
totally dry, drill two
19/32” or 5/8”
holes, between
2” - 36” apart, on
the return line. Be
careful not to go
through other side
of pipe.
Arrows on scoops must
face each other.
For better stability, POOL FROG
Cycler may be mounted on
a treated wood base using
Phillips pan head screws,
one
in front and one in back. If you
have questions about stability,
please contact your dealer or
King Technology.
To prevent damage to heaters or filters, see
your dealer about installing a
corrosion
resistant check valve
which will reduce the
back flow of chlorine gas when the Cycler is
turned off.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Attach scoop clamps over the
scoops and around the pipe.
Install
SCOOPS 2”– 36”
APART ON STRAIGHT
PIPE
