Pool Blaster iVac M3 Скачать руководство пользователя страница 2

Страница: 2 / 4

Installation Guide - NiMH to Lithium

Need Help? Contact Customer Care at (732) 967-9888

Upgrading the Pool Blaster® iVac M3 Motor Box

STEP 3:

Remove the 4 screws on the main

body.

STEP 4:

Using a screwdriver, remove the

small screw as shown above.

STEP 5:

Separate the shells until you have

access to the motor box. Remove the old

motor box and discard it as per your town’s

recycling regulations.

STEP 6:

Make sure to grab the shell where

the old motor box was and face it down as

shown in the image above.

Содержание iVac M3

Страница 1: ...ger will not work Please dispose of your original charger No cover needed Your new kit includes Motor Box with ON OFF Button P30X003LI Charger LC099 3S US EU You will need the following tools Phillips...

Страница 2: ...e 4 screws on the main body STEP 4 Using a screwdriver remove the small screw as shown above STEP 5 Separate the shells until you have access to the motor box Remove the old motor box and discard it a...

Страница 3: ...the new motor box Note that the ON OFF button does not need a cover as the design makes the motor box sealed to prevent water damage STEP 8 Place the new motor box into the shell STEP 9 Grab the othe...

Страница 4: ...p Contact Customer Care at 732 967 9888 Upgrading the Pool Blaster iVac M3 Motor Box STEP 11 Finally attach the charging adapter to the unit to make sure it fits securely Rev 4262018 http watertechcor...