Pontiac AZTEK 2003, Руководство пользователя

Страница: 199 / 428

SCV (Speed-Compensated Volume): With SCV, your
audio system adjusts automatically to make up for
road and wind noise as you drive.
Set the volume at the desired level. Press this button to
select MIN, MED or MAX. Each higher choice allows for
more volume compensation at faster vehicle speeds.
Then, as you drive, SCV automatically increases the
volume, as necessary, to overcome noise at any speed.
The volume level should always sound the same to you
as you drive. If you don’t want to use SCV, select OFF.
RCL (Recall): Push this knob to switch the display
between the radio station frequency and the time.
Pushing this knob with the ignition off will display the time.
For XM™ (USA only, if equipped), pressing this button
while in XM™ mode to retrieve various pieces of
information related to the current song or channel. By
pressing and releasing the RCL button, you may retrieve
four different categories of information: Artist, Song Title,
Category or PTY, Channel Number/Channel Name.
To change the default on the display, push the knob until
you see the display you want, then hold the knob until the
display flashes. The selected display will now be the
default.
Finding a Station
BAND: Press this button to switch between FM1, FM2,
AM, or XM1, or XM2 (USA only, if equipped). The
display will show your selection.
TUNE: Turn this knob to choose radio stations.
w
SEEK
x
: Press the up or the down arrow to go to
the next or to the previous station and stay there.
The radio will seek only to stations that are in the
selected band and only to those with a strong signal.
w
SCAN
x
: Press and hold one of the SCAN arrows
for two seconds until SCAN appears on the display
and you hear a beep. The radio will go to a station, play
for a few seconds, then go on to the next station.
Press one of the SCAN arrows again to stop scanning.
To scan preset stations, press and hold one of the
SCAN arrows for more than four seconds until PSCAN
and the preset number appear on the display. You
will hear a double beep. The radio will go to the first
preset station stored on your pushbuttons, play for a few
seconds, then go on to the next preset station. Press
one of the SCAN arrows again to stop scanning presets.
The radio will scan only to stations that are in the
selected band and only to those with a strong signal.
3-71