Getting to Know Your
RELAY
4
Driver Information Center (DIC)
Your vehicle’s Driver Information Center,
located below the tachometer in the
instrument panel cluster, can display trip
information, fuel economy information,
personalization features and other vehi-
cle messages and warnings.
The DIC controls are located on the
instrument panel to the right of the
steering wheel.
Vehicle Information
Press the (Information) button to scroll
up or down through the following Vehicle
Information selections:
• Dual Trip Odometers (Trip A and
Trip B)
• Time Elapsed
• Average Speed
• Fuel Range (approximate miles
until empty)
• Average Fuel Economy
• Instantaneous Fuel Economy
• Battery Voltage
• Oil Life (percentage of engine oil life
remaining before an oil change is
needed. This service should be
performed within 600 miles of the
Change Oil Soon message being
displayed)
Resetting Vehicle Information
1. Display the information selection
to be reset by pressing the
(Information) button.
2. Press and hold the (Set/Reset)
button until the selection resets.
Trip Odometer Reset
The trip odometer has a retroactive
reset feature, which sets the trip odome-
ter to the number of miles driven since
the ignition was last turned on. This can
be useful if you forget to reset the trip
odometer before beginning a trip.
To use the retroactive reset feature,
push and hold the trip/reset button for
at least six seconds.
Display Units and Language
Press the (Menu) button to scroll
through the following features:
• Display Units — The units of measure
in which information will be displayed
• Language — The DIC display
language
Note:
The Oil Life System must be
reset after each oil change to help
ensure the proper maintenance of your
vehicle. Use the procedure described
above to reset the Oil Life System.
Note:
If the remote vehicle start system
is used to start the vehicle, the trip
odometer will not recognize that ignition
cycle and will set the trip odometer to
the number of miles driven since the
last key-start ignition cycle.
