Pontiac 2003 Vibe, Руководство пользователя

Страница: 106 / 382

2-41
Reducing Speed While Using Cruise Control
There are two ways to reduce your speed while using
cruise control:
D Push and hold the lever to SET/COAST until you
reach the lower speed you want, then release it.
D To slow down in very small amounts, push the lever
down briefly. Each time you do this, you’ll go about
1 mph (1.6 km/h) slower.
Passing Another Vehicle While Using Cruise Control
Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may have to step on the
accelerator pedal to maintain your speed.
When going downhill, you may have to brake or shift
to a lower gear to keep your speed down. Of course,
applying the brake or downshifting to SECOND (2) or
LOW (L) takes you out of cruise control. Many drivers
find this to be too much trouble and don’t use cruise
control on steep hills.
Ending Cruise Control
There are several ways to turn off the cruise control:
D Step lightly on the brake pedal or push the clutch
pedal, if you have a manual transaxle.
D Press the CRUISE ON
-
OFF button again.
D Pull the cruise control lever toward you.
Erasing Speed Memory
When you turn off the cruise control or the ignition,
your cruise control set speed memory is erased.