manualshive.com logo in svg

Pontiac 2001 Montana, Руководство пользователя

Поделиться
Скачать
Pontiac 2001 Montana Скачать руководство пользователя страница 96

1-84

CAUTION:

If a LATCH

-

type child restraint isn’t attached to

its anchorage points, the restraint won’t be able
to protect a child sitting there. In a crash, the
child could be seriously injured or killed. Make
sure that a LATCH

-

type child restraint is

properly installed using the anchorage points, or
use the vehicle’s safety belts to secure the
restraint. See “Securing a Child Restraint in the
Rear Outside Seat Position” in the Index for
information on how to secure a child restraint in
your vehicle using the vehicle’s safety belts.

Securing a Child Restraint Designed for the 
LATCH System

1. Find the anchors for the seating position you want to

use, where the bottom of the seatback meets the back
of the seat cushion.

2. Put the child restraint on the seat.

3. If the child restraint is forward

-

facing, attach the

anchor points on the child restraint to the anchors in
the vehicle. The child restraint instructions will show
you how.

4. Attach the top strap to the top strap anchor. See “Top

Strap” in the Index. Tighten the top strap according
to the child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.

Содержание 2001 Montana









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды