Pontiac 2000 Montana, Руководство пользователя

Страница: 241 / 428

3-33
SCAN: Press and hold one of the SEEK arrows for
more than two seconds until SCAN appears on the
display and you hear a beep. Your tape must have at
least three seconds of silence between each selection for
SCAN to work. Use SCAN to listen to each selection
for a few seconds. The tape will go to the next selection,
stop for a few seconds, then go on to the next selection.
Press this button again to stop scanning. The sound
will mute and SCAN will appear on the display
while scanning.
AM
-
FM: Press this button to play the radio when a
tape is in the player. The tape will stop but remain in
the player.
CD
-
TAPE: With a tape in the player and the radio
playing, press this button to play a tape. Press AM
-
FM
to return to the radio when a tape is playing. Press
CD
-
TAPE to switch between the tape and compact disc
if both are loaded. The inactive tape or CD will remain
safely inside the radio for future listening. The display
will show TAPE and CD icons.
EJECT: Press this button located to the right of the
cassette slot to remove the tape. The radio will play.
EJECT may be activated with either the ignition or radio
off. Cassettes may be loaded with the radio and ignition
off if this button is pressed first.
CLEAN PLAYER: If this message appears on the
display, the cassette tape player needs to be cleaned.
It will still play tapes, but you should clean it as soon
as possible to prevent damage to the tapes and player.
See “Care of Your Cassette Tape Player” in the Index.
After you clean the player, press and hold EJECT for
five seconds to reset the CLEAN PLAYER indicator.
The radio will display CLEANED to show the indicator
was reset.
Tight/Loose Tape Sensor Defeat
With the radio off and the ignition on, press and hold the
TAPE CD button to disable the tight/loose tape sensing
feature to enable play of some tape head cleaners and
portable CD adapters. The radio will display READY
and flash the cassette icon. The tight/loose tape sensing
feature will then be disabled until the next cassette eject.
Playing a Compact Disc
With the ignition on, insert a disc partway into the slot,
label side up. The player will pull it in and the disc
should begin playing. If you want to insert a CD when
the ignition is off, first press the CD eject symbol or the
RCL knob.