Ponovo PW466i, Руководство по эксплуатации оборудования

Страница: 9 / 39

9
PW466i Hardware Instruction Manual
5.5 Pause button
The Pause button on the front panel is designed to cut the current/voltage outputs either for test
purpose or under emergency case.
‘ Manual ’ control mode ‘ Auto ’ control mode
Push ‘ Pause ’ button cut the current/voltage cut the current/voltage, PC
software will continue to run
Release ‘ Pause ’ button current/voltage output will be
recovered from the point
where we push the Pause
button
current/voltage output will be
recovered from the software
execution point at the moment
we release the Pause button
5.6 LED Indication
The LED indication on the front panel gives information about the hardware working conditions
In normal working condition the status of LEDs will have the following indication in ‘Power on’ and
‘Testing process’ conditions
Power on
condition
All current/voltage channels
are having outputs
Power lamp Lighted Lighted
Online lamp Not lighted Lighted and flashing
PAUSE lamp Not lighted (push to
light)
Not lighted （ push to light ）
Overheat lamp Not lighted Not lighted
Overload
lamp
V Not lighted Not lighted