PONNDORF P Classic 10, Руководство по эксплуатации

Страница: 16 / 34

PONNDORF Gerätetechnik
GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation manual
Hose Pump series
P_classic / PC-S
Page 14 von 30
Version 005_GB / 04.2021
5.2 Diagram of the leakage detector for operating the pumps in non-
hazardous locations (art.-no. 93-000-055)
The following diagram is only valid for the leakage detector consisting of:
• sensor for leakage detector (make Ponndorf, standard)
• switch amplifier (make: Disibeint, type DNSA)
The connections must only be made by qualified and authorized
personnel!
The standard detector for hose leakages is not suitable for use in
hazardous locations and non-conductive media.
drive
pump
B2 = Level control, type DNSA
B1 = sensor
F1 = fuse
F2 = motor fuse
F3 = motor overloads
H1 = run light
H2 = signal horn, signal lamp
K1 = motor contactor
K2 = flasher (0,5 sec.)
M
= motor (pump drive)
S1 = push button