PONNDORF P Classic 10, Руководство по эксплуатации

Страница: 9 / 34

PONNDORF Gerätetechnik
GmbH
Leipziger Strasse 374
D - 34123 Kassel
Operation manual
Hose Pump series
P_classic / PC-S
Page 7 von 30
Version 005_GB / 04.2021
3.2
Safety instructions for hose pumps in hazardous locations
• Explosive gas mixture or dust concentration can cause serious or
even fatal injuries in conjunction with hot, voltaged, pressurized
and moved parts of the pump
•
•
Only qualified technical personnel is authorized to effect
installation, connection, operation as well as maintenance and
repair works in consideration of
- provided instructions
- danger signs and/or decal information
- every other provided instructions for the user
- the system-dependent regulations and requirements
- the currently valid regulations concerning explosion protection
and safety as well as rules for accident prevention
The pump in connection with the mobile base plate only
fulfils the ATEX directive (
EC Directive 2014/34/EC)
in a
stationary condition.
In case of moving the pump the operator has to make sure that
no explosive environment exists!
3.3 Intended use
• Ponndorf Hose Pumps are intended for use in commercial
facilities and are only permitted for use in accordance to the
information of the technical documentation and of the nameplate.
They comply to the currently valid standards and regulations and
meet the requirements of the European directive 2014/34/EC.
•
If a pump is coupled to a drive unit, the operating manual of the
drive and other provided components must be observed, too.