respectively. The measured cumulative value will be automatically stored, and
will not lost even under long time power outage, which is great for circuits that
loose power.
How to clear EC and CT data?
Respectively switch to EC and CT monitoring interface. Press & hold “
SET
”
for 2s, the cumulative electricity consumption value and time will flicker. Press
“OK” to reset.
A
○
7
E
A
Overload Indication Setting
Press the “
Watt/VA
” key once, on the watt display interface, press & hold
“
SET
” for 2 seconds, it will display the overload setting value (as shown in
Figure 10). Press “
SET
” again, the thousand-digit on LCD will flicker, press
“
▼
” or “
▲
” to adjust value and press “
SET
” after completing thousand-digit
adjustment to set hundred-digit, and so on. Press “
OK
” in the end to exit the
setting mode.
Note:
The default factory value is 1500W, you can set your own limit if
needed. When the power of the electrical appliance exceeds the setting, the
