（
ＣＲＯＳＳＯＶＥＲ Cable
） （
ＤＩＲＥＣＴ Cable
）
３ ＞ Connect PＯＷＥＲ adaptor.
４ ＞ Connect Sensor, Audio Mike, Cable of Speaker, only when necessary.
３－２ Setting IP Address of a Camera.
３－２－１ Changing IP Address of a Camera and Setting DHCP Address.
Ａ） The initial IP address of the Camera is
１９２．１６８．１．１００. To change the IP address,
install the provided IP Finder Software to a PC. Then press SCAN on the right of the following
screen, all the IP address of Cameras presently connected to Sebnet will be shown. (Figure 1)
(Figure 1)
Ｂ）Clicking IP address of the camera, CONNECT and RESET Buttons will appear.
By pressing CONNECT button, will be connected to Web Viewer (browser) of the camera.
(Figure 2)
By pressing REST button, a window will appear. (Figure 3)