PondXpert SpinClean PXSC04500 Скачать руководство пользователя страница 4

Access to the filter can be gained simply by unlocking the securing clamping bracket around 
the rim (locking catches on smaller models). You can then simply lift the lid. 
Take the foam filters out of the unit and carefully wash away any solids using a bucket of 
POND WATER. Once clean replace the foams back in position. 
The bacterial chamber at the bottom of the unit should not be cleaned unless they are highly 
contaminated and should only be cleaned with pond water to preserve the microorganisms 
that keep your filter biologically active. 
 

Quick Easy ‘SpinClean’ 

Turn to the ‘clean’ position, the water flow is reversed and exits through the waste outlet. 
This waste water should run to waste by attachment of a suitable length of hose. 
Now turn the blue handle to agitate the sponges. This will extract dirt from the internal 
sponges and this sludge will exit through the discharge outlet. 
         . 

Removing the filter 

If your filter is ever taken away from the pond (ie-winter storage) then all of the filter media 
(foams and biomedia) must be thoroughly cleaned before restarting. Your filter will then 
need to undergo the ‘maturation’ procedure phase as described above. 
Note: Take care to ensure rubber O ring is correctly positioned between lid/unit after 
opening. Failure to do so will lead to leaks (a smear of Vaseline around this ring may help 
keep the seal watertight). 

 
Filtration Spares and consumables 

The filter is supplied with everything you need to get started (including filter media, UV 
bulb and quartz tube for the UV). Over time these parts may need replacing and can be 
purchased from your retailer.  
 

Periods of operation 

Maintain filtration 24 hrs a day through the fish feeding season (typically early March-
October when the water temperature is above 10 degrees C), but preferably all year round. 
In the winter operating the pump and filter will maintain a background level of friendly 
bacteria in the filter and help prevent the pond icing up in all but the severest weather 
conditions. 
The UV bulb should be changed at the beginning of every new season. The lamp may look 
like it is working but the levels of effective UV radiation decrease over time. 
                                     

Limited Warranty 

This product is guaranteed for a period of 12 months from the date of purchase for material 
or manufacturing defects. The guarantee covers the substitution of defective parts. However, 
the guarantee is considered null and void in the case of improper use, improper handling or 
negligence on the part of the buyer. The UV bulb is not guaranteed. If your pondXpert filter 
fails please take it back to the retail outlet from where it was purchased. You will be 
required to provide your receipt/proof of purchase. This does not affect your statutory rights. 
 
PondXpert 
A3 Bentley Avenue 
Billingham 
TS23 4BU 
UK 

      01642 370898      www.pondxpert.co.uk 

 

Your appliance contains 
valuable materials which 
can be recovered or 
recycled.  Leave it at a 
local civic waste collection 
point. 

Содержание SpinClean PXSC04500

Страница 1: ...ns on the purchase of your pondXpert filter Once your filter is connected you can look forward to many years of healthy pond water Your filter is pump fed so must be connected to a suitable pond pump in order to work correctly Ideally a solids handling pump will be used as this will push dirty waste and debris into the filter PondXpert filters are carefully inspected and tested to ensure both safe...

Страница 2: ... and skin NEVER look directly at the UV when switched on The translucent inlet will illuminate showing that the UV is working Always disconnect all equipment in the pond before starting to handle maintain repair or install any pond equipment The ultra violet clarifier housed within the filter is electrically operated so great care must be taken during installation and operation The following elect...

Страница 3: ... 40mm 3 4 to 11 2 can be attached to the inlet hosetail Your pump and filter outlet should be positioned at opposite ends of the pond to promote maximum circulation Cut the inlet hose to the size appropriate to the size of hose you are using Then connect the hose from your pump to this inlet hosetail and secure with hose clips The translucent hosetail should be connected to the filter outlet as de...

Страница 4: ...ration Spares and consumables The filter is supplied with everything you need to get started including filter media UV bulb and quartz tube for the UV Over time these parts may need replacing and can be purchased from your retailer Periods of operation Maintain filtration 24 hrs a day through the fish feeding season typically early March October when the water temperature is above 10 degrees C but...

Отзывы: