P O N D M A X . C O M
EXPLODED VIEW
1
2
3
4
5
6
7
8
9
10
1
Front FIlter Screen
Sponge
Flow Control Knob
Volute Assembly
O-Ring
Impeller Assembly
Pump Motor Body
Suction C p Feet x4
3/4” Barbed Adapter for Inle
1/2” Barbed Adapter Fitting
5
9
10
11
1
2
3
4
6
7
8
IMPORTANT NOTES
• It is important that this procedure is carried out
regularly as the cooling path inside the motor could
become clogged. If the impeller assembly becomes
worn or damaged it should be replaced (available from
your dealer or special order). Failure to do so may
cause serious damage to pump motor. Inspect for
signs for wear and tear. The impeller set is a wearing
consumable part. Replace if necessary.
• Once the cleaning and inspection process is
completed, reassemble in the reverse manner. Reinstall
the shaft, and then carefully slide the impeller onto the
shaft.
The impeller will pull itself in by magnetic force, this
is normal. (Take care not to pinch your fingers). With
the impeller in the correct position, carefully place
the impeller cover back on, and then rotate
clockwise to lock into position. Making sure the
ceramic shaft is located properly in the impeller
cover center hole.
• Then reinsert the internal sponge back into the
filter cage and reattach to the pump or reattach
optional prefilter, which ever is applcable to your
application.
• Reattach tubing/fountain kit, submerse in water.
IMPORTANT
These accessories and attachments are recommended for use with your PondMAX product specified in this manual. The use of any other accessories or attachments
might present a risk of injury to persons. Only use the accessory or attachment for its stated purpose.
4
PMAX PV250_350_550 Pump Instructions.indd 6
28/9/16 9:50 am
P O N D M A X . C O M
