Pond Technics Pro Tech 700501, Руководство пользователя

Страница: 4 / 11

- 6 - - 7 -
E E
• Plug the power cord into the power outlet.
• You can control the light intensity and color (if RGB) with the remote control.
• This control box can be used with the following lights:
RGB Dimmer
820010 820020
820011 820021
820030 820040
820031 820041
Linking a remote control:
• Open the controlbox:
• Untighten the plastic screws
• The lid can now be removed an inch
• Untighten the upper 2 plastic screws entirely. The lid can now be opened hinging on the bottom
screws
• Make sure the controlbox is powered on and there is a viable battery in the remote control
• Press the “Learning key” on the “RF LED Controller” in the controlbox, see fig 2
• Next press the colorwheel or a botton on the remote control
• If the connection has succeded the lamps will blink
Clearing the memory of the controlbox:
• Open the controlbox:
• Untighten the plastic screws
• The lid can now be removed an inch
• Untighten the upper 2 plastic screws entirely. The lid can now be opened hinging on the bottom
screws
• Press the “Learning key” on the “RF LED Controller” for 3 seconds, see fig 2
• If this action has succeded the lamps will blink
Under optimal circumstances the remote control has a range of 45 meters.
The signal of the remote control can travel through brick walls and glass, the range is however negati -
vely affected by this.
Reinforced concrete mostly gives problems with RF, it is recommanded to avoid that the RF signal
must pass through this.
Individuals that are not familiar with this product should not use this product.
Application
This control box can be used to control the Bright Power underwater lighting.
With the remote control or the IOS or Android application, one can change the light intensity and the
light color if using an RGB control box (Art. No. 700505) and the corresponding RGB Bright Power
lamps
Additional wireless wall transmitters and remote controles are available:
*Wall transmitter need to be connected to the powergrid (220 V AC)
Safety instruction
• When the device has been damaged, it should no longer be used.
• The device will only work on 220 V AC.
• When you are uncertain of the installation, please contact a certified technician.
Installation instructions:
• Mount the controlbox using the proper fastening materials.
• Mount the device at a dry location with the connections at the downward side.
• Connect the lamps to the cable coming out of the control box at the right bottom side by using a
waterproof distribution box.
• Always connect the lights in parallel, never in series, see fig 1.
• Make sure to connect the wires using the right colorcode, see scheme below.
Caution: Only strip and use the electrical wires required!
Art. No. 700506 700502 700507 700503
Product
RGB wall transmit-
ter*
Dimmer wall
transmitter*
RGB remote Dimmer remote
Control box
RGB
Bright Power
110mm RGB
Bright Power
50mm RGB
Control box
Dimmer
Bright Power
110mm WW
Bright Power
50mm WW
Yellow/green Yellow/green Yellow/green Red/brown Red/brown Red/brown
Black Black NA Blue Blue Blue
Blue Blue Blue
Brown Brown Brown
Grey Grey Grey