PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
6. Test fit the assembled container fountain kit in the container.
For installing the fountain with the pump cord over the side of
the container, (recommended) proceed to step 9. For having
the pump cord comes out through the container wall, proceed to
the next step. Fig. 6
Fig. 6
7. Select a spot on the container wall that is the least visible from
normal viewing for the cord exit. Create the hole, using a drill
with appropriate bit capable of boring through the container
material and large enough so the plug head can pass through.
Fig. 7
Note: Appropriate safety equipment should be used.
Fig. 7
8. Seal up the hole along with any other drainage holes in the
container. Press plumbers putting into the hole and seal it with
silicone caulk. Allow the sealant 24 hours to dry before filling
the container with water. Fig. 8
Fig. 8
Cord
Silicone
Putty
