PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750
3
EN
PREPARATION
Before beginning assembly or operation of product, make sure all parts are
present. Compare parts with package contents list and diagram. If any part is
missing or damaged, do not attempt to assemble, install or operate the product.
Contact Customer Care for replacement parts.
• Estimated Assembly Time: 5 minutes
• Tools required for assembly: hacksaw
OPERATION INSTRUCTIONS
Step 1
. 3/4 in. ID tubing is
recommended for optimum
performance. Check your pump to
determine a compatible tubing size.
If using 1/2 in. ID tubing continue to
step 2.
If using 3/4 in. ID tubing, trim the
tubing adapter using a hacksaw at
the location indicated.
If using 1 in. ID tubing, trim the tubing
adapter using a hacksaw at the top of
the widest tier.
Step 2
. Place the tubing adapter on
the left hole of the UV Clarifier and
use a gasket for it to be sealed tightly
when fastened.
Hand tighten the locking ring outside
the tubing adapter for it to be secured
in place. Repeat for the right hole.
Step 3
. Unplug your pump from an
electrical source before connecting
tubing.
Connect tubing from the outlet of a
pump to the inlet of the UV Clarifer.
NOTE:
The inlet on the UV Clarifier is
marked “IN”. Pump and tubing are not
included.
1
2
3
