PolyVision Collaborative ToolBar, Инструкция по эксплуатации

Страница: 8 / 10

07 Collaborative ToolBar Instruction Manual
Cleaning difficult marks
To remove hard to clean stains moisten a clean, dry cloth with water
and apply a small amount of abrasive cleaner to the cloth. Work in
small sections cleaning the area using a back and forth motion with
gentle pressure. Wipe off all reside with a dry cloth.
Soap residues on the surface will result in decreased dry erasability.
Rinse well with clean water and wipe dry with a clean cloth.
To quickly and easily remove permanent marker , go over the top
of the writing with a dry erase marker. Then, simply erase. In most
cases, this will remove the marker.
For chalk surfaces , clean the surface with clean, warm water. (Use
5% Extran MA 02 or phosphate-containing cleaner in water and rub
well with a kitchen sponge when necessary.) Rinse well with clean
water and wipe the surface with a window stripper or squeegee.
Allow the surface to dry completely before use.
For warranty information visit polyvision.com/warranty
Remove Ma
Residue