Polyvend ULTRA VENDOR 32, Руководство по обслуживанию

Страница: 16 / 53

SERVICE MODE
The service mode (s1) can be entered by pressing the “MODE BUTTON” located on the
control board just below the two red buttons for the changer pay out. Access is through a
hole on the back of the drawer assembly (See Figure 5). By using the numbers and letters
on the alphanumeric key pad, the operator can set the prices for the entire machine through
the control board. To the right of the mode button (See Figure 6) are two switches; one to
be used to turn the forced vend feature “on” (switch #1) and the other to turn the changer
mode feature "on" (switch #2). With both option switches 1 & 2 “on”, when the service
vend mode button is pressed the control board will automatically be in the service vend
mode. Any other combination of these switches will enable the price setting function.
FIGURE 5
CONNECTOR PERIPHERAL PINS
P1
AC POWER 4
P2 BILL VALIDATOR 12
P3 CASH COUNTER 7
P4
P5
CHANGER 11
MOTORS 13
P6 KEYPAD 10
0
.
.
.
.
.
.
3
0
.
FIGURE 6
13