Polytron SCA 32, Руководство пользователя

Страница: 20 / 28

20
3.4 You can choose between different configurations in the setup tab:

Satellite Channel Routing „FLEX application“ + Universal
Dynamic SCR/dCSS-solution with directly access to all connected Sat-levels and thereby to the
entire programme diversity for up to 32 users/receivers. One output [1] will be SCR/dCSS, while
the other output [2] is working in universal mode (see section 3.1). The communication protocol
between the device (SCA 32 Flex) and the connected SCR/dCSS receivers is based on EN50494
and/or EN50607. All connected receivers have to support these control protocols.

Satellite Channel Routing (
“Independent Output”)
Each output can have an independent SCR/dCSS configuration with up to 32 users/receivers
overall. For example you can setup 2 x 16 user bands and the outputs [1 & 2] behave like two
independent single cable solutions with up to 16 user bands each (see section 3.3).

Satellite Channel Routing (
“Shared Output”)
In this setup you can access the same configured user bands from both outputs [1 & 2]. Up to 32
users/receivers can be connected with each output [1 & 2]. This option is useful to split the
SCR/dCSS output to two different locations without using a splitter.

Headend Mode
„FIX application“ + Universal
The device is acting like a mini-headend (SCA 32 Fix) with up to 32 fixed configured transponders
and access for an unlimited number of users/receivers. One output [1] will work in static mode
(headend mode), while the other output [2] is working in universal mode (see section 3.2). In this
mode no special receivers are required.

Quattro LNB Input (1 Satellite)
The SCA 32 will be setup to receive a Quattro LNB signal on its inputs.
It is possible connect (chain) the outputs of multiple SCA 32 together with RF combiners and
setup each of the devices to provide the signal from a different satellite position.
For example you can configure one SCA 32 for satellite A and a second one for satellite B. If the
receiver now requests a channel from satellite A the first SCA 32 will enable the user band while
the second one will disable the user band. If the receiver then requests a channel from satellite B,
the first SCA 32 will deactivate the user band and the second one will provide the user band now.