Polytec PSV-500, Руководство по оборудованию

Страница: 20 / 109

3-6
3 First Steps
3.3.2 PSV-E-530 Junction Box
The PSV-E-530 junction box is only used for the operation as an M system.
Front view The front view of the junction box is shown in the following figure.
Figure 3.3: Front view of the junction box
1 REF 1 analog input (BNC jack)
Analog voltage input for the reference signal
2 REF 2 to REF 3 analog inputs (BNC jacks)
There are up to two additional analog voltage inputs available for reference
signals (not for PSV-3D).
3 TRIG IN TTL input (BNC jack)
TTL input for an external trigger signal
4 SYNC TTL output (BNC jack)
TTL output for the SYNC signal of the function generator
5 SIGNAL generator output (BNC jack)
Analog voltage output for the signal of the function generator
Back view The back view of the junction box is shown in the following figure.
Figure 3.4: Back view of the junction box
1 Ch0 signal input (BNC jack)
Connection for the BNC-SMB connecting cable (Ch0) from the PC
2 D0 signal input (BNC jack)
Connection for the BNC-SMB connecting cable (D0) from the PC
3 TRIG signal output (BNC jack)
Connection for the TRIG line of the ACQ HM acquisition cable from the PC
4 REF 3 signal output (BNC jack)
Connection for the AI_3 line of the ACQ HM acquisition cable from the PC
5 REF 2 signal output (BNC jack)
Connection for the AI_2 line of the ACQ HM acquisition cable from the PC
REF 1
REF 2
REF 3 TRIG IN
SYNC
SIGNAL
1 2 3 4 5
Ch0
D0
TRIG REF 3 REF 2 REF 1
1 2 3 4 5 6 7