Polytec PDV-100, Руководство пользователя

Страница: 5 / 63

1-1
1 Safety Information
1 Safety Information
1.1 General Safety Information
Notes Please read this manual before using the instrument. It will provide you with
important information on using the instrument and on safety. This will protect
you and prevent damage to the instrument. Pay particular attention to the
basic safety information in
CHAPTER
1 and the information in installation,
operation and maintenance in
CHAPTER
3.
Please keep this manual in a safe place and make it available to people using
the instrument. Never pass the instrument on without the manual.
In this manual the following graded safety and warning labels are used:
NOTE!
Identifies action required to simplify using the instrument !
CAUTION!
Danger from "Reason of Danger" ! Identifies the danger caused by an action which could
result in damage to the instrument, if it is not avoided !
WARNING!
Danger from "Reason of Danger" ! Identifies a possible danger resulting from an action
which could lead to death or (serious) injury, if it is not avoided !
Intended use The instrument is intended for laboratory use and for use in an industrial
environment. It may only be used within the limits given in the technical
specifications (refer to
CHAPTER
7).
Faultless and safe operation of the instrument depends on correct and proper
transport and storage, installation and assembly as well as careful operation
of the instrument.
When assembling, installing and operating the instrument, the safety and
accident-prevention regulations for the respective use must be adhered to.
Qualification This instrument may only be operated by persons who are familiar with
electrical measurement equipment and have been instructed in the use of
lasers. Please pay attention to the information on laser safety in
SECTION
1.2.
Intervention for maintenance and repair work may only be carried out by the
manufacturer himself or by qualified personnel authorized by the
manufacturer.
Disposal An instrument which is no longer required must be disposed of according to
the local regulations unless otherwise provided by the manufacturer.