STEP-BY-STEP ASSEMBLY:
4 Hole Panel (1PC)
(A)
Step 1:
Attach the 4 Hole Panel (A) to both Back
Legs (D) using 4x Screws (G).
J:
Allen Wrench (1PC)
Then attach all the 2 Hole Panels (B) to the Back
Legs (D) using 8x Screws (G). Secure all with
Screwdriver (K)
Step 2:
Attach the Front Legs (C) to Back Legs (D)
using 2x M6X50 Bolts (F) on each side as pictured.
Secure each with Nut (H) and Washer (I).
Fron
t L
eg
s (2P
CS)
(C
)
Back Legs (2PCS)
(D)
2 Hole
Panels (4PCS)
(B)
H:
Nut (4PCS)
I:
Washer (4PCS)
K:
Screwdriver (1PC)
Sanding Sponge for Cleaning
Front Leg Suppot
(1PC)
(E)
A:
4 Hole Panel (1PC)
B:
2 Hole Panels
(4PCS)
C:
Front Legs (2PCS)
D:
Back Legs (2PCS)
E:
Front Leg Support (1PC)
F:
M6X50 2” (6PCS)
G:
Screws (12PCS)
L:
Hand Wrench(1PC)
Step 3:
Attach the Front Leg Support (E) between the
Front Legs (C) using M6X50 Bolts (F).
G
G
F
F
H
H
I
*IMPORTANT NOTE: DO NOT OVERTIGHTEN THE BOLTS*
Tighten all bolts and screws after assembly is complete.
