4
1. THE PRODUCT SUITS FOR 10'-20' FRAME POOLS.
2. CHECK TO MAKE SURE THE VERTICAL BEAMS OF YOUR POOL BELONG TO ONE OF THE
BELOW SHAPES AND SIZES:
SETUP INSTRUCTIONS
3. Align the Fitting Block with the correct position number (see above) and slot
the fitting blocks into the Frame Clamps. You should hear a click when
secured.
NOTE:
Before moving to the next step, make sure the Fitting Block is in the
correct position. With the frame clamp, if not, refit the Fitting Block by:
a. Pressing both the snaps towards the center, and
b. Pushing the Fitting Block out of the Frame Clamp.
4. Insert and secure the Vertical Beams into the Frame Clamps.
Fitting Block
“Click”
Vertical Beam
4
1.25” Round
1.5” Round
55 X 35 mm Oval
60 mm Width
D-shaped
66 mm Width
D-shaped
Shape
Size
Position of Fitting Block
1
2
3
3
4
E
D
C
B
A
5. Snap the Beam Connectors onto the Vertical Beams.
Beam Connector
3
6. Install the assembled Vertical Beams onto the pool vertical beams.
NOTE: Open or close the Clamps CAREFULLY to avoid breaking them.
1
2
3
4
