OWNER
′
S MANUAL
3
EXTENDER KIT SETUP INSTRUCTIONS
2. Unlock the lock nut of the end-to-end connector, and pull
apart the plugs to reveal the male connector. Then insert
ground stakes into LED lights.
3. Save the power adaptor for future use.
5. Locate the end-to-end connector of the second kit.
Open the protective cap to reveal the female
connector.
7. Push the ground stake into the ground (soil/lawn) at
your desired spot.
9. Simply use the remote control to enjoy the color
spectacle. Please see REMOTE CONTROL
INSTRUCTIONS.
4. Take the second kit out from the box, and insert ground
stakes into LED lights.
6. Connect the two kits together. Tighten the lock nut to
secure the connection.
1. Locate the end-to-end connector and ground stakes
of the first kit.
8. Plug it in to the wall outlet.
Ground Stake x 3
TIP:
For best signal quality/reception,
make sure the controller is placed on
a raised area free of obstacles.