Part
1
2
3
Description
Section 1
Section 2
Eye bolt (preassembled with wreath)
Quantity
1
1
4
Congratulations on purchasing your new wreath from
Polygroup®!
Carefully follow the instructions below on how to quickly and easily set up your new wreath.
1. Fasten the eye bolts of section 1 to section 2.
2. Fasten the eye bolts of section 2 to section 1. Connect the
plug of the section 2 to the end-connector of sector 1.
3. Shape and shift wreath branches to fill in any gaps. Plug
the adapter from section 2 into a wall outlet.
MODEL #: GD4000CYKD00
WREATH ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Wreath
(For Indoor and Outdoor Use)
Input: 120V, 60Hz, 0.16A
Output: 29V DC 0.28A
PACKAGE CONTENTS
1
1
section
100 Lights
1
End-connector
Plug
100 Lights
100 Lights
Screw the eye bolts attached
through the hole and tighten.
2
section
1
section
2
End-connector
Plug
Insert Green
Label Extension
Cord into Adapter
Adapter
To Be Plugged
Into Wall
Outlet
Control box
Eye bolt (preassembled
with wreath)
STORAGE INSTRUCTIONS:
1. Remove all ornaments and decorations.
2. Disconnect from power source.
3. Detach all light plugs. Then disassemble wreath sections
from each other by loosening the eye bolts.
4. Store your wreath in a cool, dry place away from sunlight.
Exposure to excessive heat or humidity may damage the
wreath.
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
OR
1-888-919-0070